VTOPEK DVR Inch Smart Screen Player User Manual

DVR Inch Smart Screen Player
korisnički priručnik

Predstavljanje proizvoda

Thank you very much for buying this Apple CarPlay. For your better use of the carplay, please note the following:

• This carplay is not compatible with Huawei mobile phones, and some Android phones may be disconnected, which is not caused by product failure.
• Check the memory card. The maximum support is 128GB. The quality of the SD card has a great impact on the stability of video recording. To record video safely, use SD cards from major brands such as SanDisk, Kingston, Toshiba, and Samsung. Speed certification must be at least Class 10 .
• Please use our special car to charge (3A), insufficient current and voltage of the car may also lead to a restart.
• Too many phones connected will cause connection difficulties. Please try to clear part of the Bluetooth connection record. Please read the instructions carefully before use. If you encounter any problems, please contact us in time.
• It is strictly forbidden to use the mobile phone data cable, which will cause damage to the machine.

Upute za ožičenje

Sučelje i funkcije gumba

Instalacija kamere

• Locate the drilling hole, find the appropriate installation position in the license plate attachment, mark it with a pen, and then drill the appropriate size of the screw hole.
• Fix the camera to the rear of the car with screws. The reversing trigger wire ( red thin wire) needs to be connected to the positive pole of the reversing light, and finally, use the camera extension cable to connect to the monitor.

Click [Calibration] to enter the Parking Line settings:

• 1. Park the car in the middle of the parking space.
• 2. Manually drag the left, adjust the position of the reversing assist line up, left and right, so that the reverse assist line is horizontal to the parking line on the left of the ground.
• 3. Then drag the right side by hand, adjust the position of the reversing assist line up, down, and down, so that the reverse assist line is horizontal to the parking line on the right side of the ground.
• 4. After adjusting the reversing line, click [ confirm] to save the calibration.

Specifikacija proizvoda

Specifikacija sučelja

1. Home Button: Click to return to the home page
2. Volume Button: Click to adjust the volume
3. Brightness Button: Click to adjust screen brightness
4. Settings Button: Click to jump to the settings interface
5. Time and Day: Displays the current time and date
6. BT Music Bluetooth music interface to display lyrics
7. AirPlay: Open the iPhone screen projection and connect the device
8. WIFI Video: Follow the APP, connect to Wi-Fi
9. Car Record: Tap to view video na video ekranu
10. Carplay: Special connector for iPhone
11. Android Auto: Poseban priključak za Android mobilni telefon
12. Miracast: Open the Android phone screen projection and connect the device
13. Audio Out: 4 audio modes to choose from(Speaker,Carplay/Auto,FM, AUX）

◆ Carplay

1. Click the [ Apple CarPlay] button to enter Apple CarPlay.
2. Turn on the Wi- Fi and Bluetooth of the mobile phone first, then, as shown in the figure below, select the [ Apple CarPlay] option, click the [ BT Manage] option of the interface, connect Bluetooth with the phone, and you can open the application.
   Kada se uređaj uključi, pokušat će se automatski povezati s zadnjim povezanim telefonom.
3. Turn off your phone’s Wi- Fi to disconnect.
   Note: Apple CarPlay option only supports iPhone phones; Android phones, please select the [ Android Auto] option.

How to connect to the iPhone page?

1. Open the iPhone and go to the system Settings screen
2. The Bluetooth page is displayed
3. Find the Device Name and click to connect the Device
4. After the pairing is successful, the interface will pop up, and click “Use Carplay”
5. Veza je dovršena.

Android Auto

1. As shown in the figure, click the [ Android Auto] button to enter Android Auto.
2. Turn on the W i- F i and Bluetooth of the mobile phone first, then, as shown in the figure below, select the [Android Auto] option, click the [ BT Manage] option of the interface, connect Bluetooth with the phone, and you can open the application.
3. Kada se uređaj uključi, pokušat će se automatski povezati s zadnjim povezanim telefonom.

(Isključite Wi-Fi na telefonu da biste prekinuli vezu)

Airplay/Miracast

Airplay: Open the iPhone and enter the System Settings
Miracast: Open the Audroid phone, enter the System Settings screen

1. Enter the Wifi， connect to your local WiFi
2. After a successful connection, enter the iPhone/phone mirror funtion, and click connect device
3. Dovršite vezu

Bilješka: After the mirror function is connected, you can see your iPhone/Android phone software, video player software, and some software on the screen may not be supported for use.

BT Glazba
Bluetooth Music možete pronaći klikom na gumb Apple CarPlay ili Android Auto.

1. Turn on the Bluetooth of the mobile phone first, and select the [ Bluetooth Music] option.
2. Pritisnite opciju [BT Manage] na sučelju za povezivanje Bluetootha s mobilnim telefonom i početak reprodukcije glazbe.

The buttons correspond to Last, Play /Pause, and Next, respectively. Click on the Lyrics button [ ] za prikaz teksta.
(Neke mobilne aplikacije za reprodukciju glazbe ne podržavaju prikaz teksta)
Bluetooth(BT Manage)

Kao što je prikazano na gornjoj slici, kliknite gumb Bluetooth [ ] za uključivanje uređaja nakon ulaska u Bluetooth sučelje.
The page will display the device name, such as: T86-1 BCC9 D, and click the Modify button[ ] za izmjenu Bluetooth naziva uređaja.
Select the device name with Bluetooth, and the remote device name of the phone will appear after successfully connecting. At this time, you can use your mobile phone and other functions.

Scan the WeChat code to downloadAPPandchooseotherdownloadingmethods. After downloading and installing, open the software and exit the software after opening it. To connect to the device for the first time,youneedto entertheWIFlsetting, search for Wi-Fi, and enter your password. Reconnection: You do not need to enter the password again. Wait until the device WIF1 in the connected devices shows that it can be switched. Click Switch to connect.
A. Android telefoni
A1: Open WIFISettings on your phone and search for WIF1withthenameT86-…….. input
Password”12345678 “to connect; Then open the APP, the recorder
Video interface.
B. Apple mobile phone of the Apple iOS system
B1:Open WIFIs mobile phone, search device WIF, name T86-…… , input password “12345678” to connect; Then open the APP, the recorder
Video interface.
A1: Open Wi-Fi settings on your phone and search for WIF1withthenameT86-…….. input
Password”12345678″ to connect; Then open the APP, the video recorder interface.
B. Mobile phone with the Apple iOS system
B1: Open Wi-Fi settings of the mobile phone, search device Wi-Fi, name T86-……, input the password
“12345678” to connect; Then open the APP, the video recorder interface.
Car RecordAs shown in the picture above, the main page will not display the camera image; you need to click the car record button to view sliku kamere.
When a card is inserted, the system automatically enters the video mode, and when recording, the small red dots in the [ Driving Monitoring] button will flash.
Swipe the screen to the left to switch the front/rear images of the rear-view mirror dash cam to record at the same time.

Reproduciranje videozapisa

As shown in the figure above, click the [ ] button to enter the video playback interface.Možete kliknuti na vrhu za reprodukciju videa i na desnoj strani za reprodukciju videa.

	Upetljani video snimljen prednjom kamerom.
	Upetljani video snimljen stražnjom kamerom.
	Kliknite na video spremljen nakon zaključavanja.
	Kliknite za view slike snimljene funkcijom fotografije jednim dodirom.
	Click the 【Delete】 button to delete.

4 Audio modovi
Speaker： Audio output from the speaker
Carplay/Auto: Use your phone to connect the original car Bluetooth.
AUX： Audio output from AUX, adjust the volume in the original car
FM: Our product can also be connected to an FM transmitter to enable wireless transmission on the same channel as your FM radio.
Built-in Speaker & AUX
This carplay screen for the car has built-in speakers, but for louder sound, you can transmit audio to your car speakers by either FM frequency syncing or connecting the included AUX cable to your car’s AUX input jack.

Prijenos FM
Kao što je prikazano na slici, kliknite gumb [FM Transmit] za ulazak u funkciju FM prijenosa: može emitirati zvuk opreme, primati ga s originalnim radiom u automobilu i reproducirati ga putem originalne sirene automobila, uživajući u originalnom automobilu razini.
When you turn on the FM Transmit option, the monitor will no longer emit any sound .
At this time, you need to turn off the FM Transmit or match the sound to the car’s built-in stereo to have sound.
( Not using the original power cord will cause the FM Transmit signal to deteriorate, or the function cannot be used.)

1. Select the frequency band you want to transmit, e.g., FM88.0MHZ.
2. Podesite prijemni pojas autoradija na FM88.0MHZ.

Bluetooth
Select this mode, and then connect to 【Apple CarPlay】 or 【Android Auto】 cast the screen, you can use the phone’s Bluetooth to directly connect to the original car’s Bluetooth. After the connection is successful, all sounds from the device will be transmitted to the original car speakers via Bluetooth.
Postavka
As shown in the figure, click the 【 】 button in the lower left corner to enter the setting interface.